DEVAISE 5-Drawer Wood Dresser Chest with Door

This particular unit was perfect! Five stars plus. However, I can’t guarantee that if I purchased another, I would have the same results. Apparently this company (and others) have multiple suppliers for the same products, with some suppliers having better quality control than others. I have purchased three units from this company; the first one was perfect; good instructions, no missing parts, pre-drilled holes in place, and perfect fit. It seems expensive, but I couldn’t have purchased the materials and made it myself for any less, and the time required for cutting, painting, etc. would have been much longer. The second unit (seven drawers) had horrible instructions; an extra part that took a while to determine placement, and some of the pre-drilled holes were not there. The third unit (also seven drawers) had better instructions, but was missing some pre-drilled holes and also was missing some screws. Had I purchased the second unit first, I would not have purchased anything else from this company, but overall my experience was positive (thus, four stars).

Okay first it showed up in a soggy box. Wet from rain and apparently drug through a puddle on its side, I imagined it was doomed.

Upon opening the box Inwas pleased to see the entire thing is surrounded by EPS foam. It protected the particle board aka glued up sawdust from absorbing moisture.

I layed everything out and compared to instructions/parts list. Do this BEFORE getting into assembly with anything.

All parts present plus a couple of spare bits of hardware.

Use a screw driver! Not your lithium brushless nut driver set to “lugnut”… So many people complain of stripped screws and these just take a bit of snugging up, if you hear wood cracking, shredding paper or crunching, it is too tight 😉

I assembled using wood glue, a couple of drops in every peg hole, and in the screw in post holes. Having a little squish out as you push parts together is ideal and will give the joints rigidity. Wipe off excess glue from corners on the visible “faces” of the furniture using a slighty damp paper towel.

People mentioned having all kinds of problems putting these together… like drawer bottoms being too short, or trying to put them in AFTER putting the front and back of the drawer together. You have to put the face, and two sides on, then slot the drawer bottom in, making sure it is longways, (it is literally 1/8″ longer in one direction and it matters) then put on the back to trap it in place.

Drawer holes line up fine if you have your piece right side up. Some people mention having to redrill drawer holes… Every piece in this kit is directional except for the pegs. The top and bottom look identical on one side, but one piece has extra holes on the outside, where wheels mount…

Bottom drawer sticking? I found I had to give all of the track screws another quarter turn or so on those bottom rails. It is important to make sure the rail is flush against the wood otherwise the wheels on the drawer will hit the screws like speed bumps.

Why bottom only? Probably because this is the only drawer rails you put in while the thing is assembled making it harder to get screws in straight and as tight.

It is together, sturdy, sitting under a rather beefy 65lb laser printer.

If I had to moan about anything, it would be the wheels. They do not inspire confidence at all. Light, thin plastic wheels mounted by a metal plate about as thick and strong as the lid of a soup can. These will not survive rolling over a threshold. But once in place do allow for some movement of the stand to deal with paper jams and whatnot.

I feel the overall quality was worth the price. Better than a lot of the Ikea stuff I’ve had in the past. But don’t expect heirloom quality furniture here 😉

 The cabinet has become an essential part of my home office, serving as the perfect storage solution for my art and resin supplies. Its sleek black design complements my workspace, and the spacious drawers and additional storage compartment behind the door provide ample space to keep my creative materials organized and easily accessible.

As an artist, I have a variety of art tools and materials, including paints, brushes, and sketchbooks. The five roomy drawers offer plenty of space to categorize and store these items, allowing me to maintain a clutter-free and efficient workspace. Additionally, the door compartment comes in handy for storing larger art canvases and resin supplies, keeping everything within reach while reducing visual clutter.

While the dresser itself is well-constructed and aesthetically pleasing, I did encounter a minor inconvenience with the original plastic casters that came with the product. They felt a bit flimsy and did not provide the stability I needed for frequent movements around my workspace.

To address this issue, I made a simple modification by replacing the plastic casters with stronger metal ones that feature rubber wheels and built-in brakes. This upgrade has significantly improved the mobility and stability of the dresser, making it easier for me to access my art and resin supplies whenever I need them.

Overall, the cabinet has proven to be an excellent addition to my home office. Its functionality, ample storage, and stylish appearance have greatly enhanced my creative workspace. If you’re an artist or crafter looking for an efficient and attractive storage solution, I highly recommend considering this dresser. With a few adjustments, such as upgrading the casters, it becomes a practical and versatile asset for keeping your art and resin supplies organized and ready to use.